MA05 Red Matte Roll
One 12in x 30ft roll of Siser EasyWeed Matte Color MA05 Red.
Multiple of this product MAY be shipped as fewer larger rolls up to a max of 150ft total, but this is not guaranteed, it depends on stock levels of cut and uncut material. Please order the largest size possible for the best value and if you have specific preferences include notes in the comments box.
Size tolerance is +/- 1/4in on the width and 6in on the length.
Only 100% genuine Siser EasyWeed Heat Transfer Vinyl ( HTV ) is used.
EasyWeed® Heat Transfer Vinyl
The most trusted heat transfer vinyl brand in the world
Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that's great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.
EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.
Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
Cricut: Blade: Standard Setting: Iron-on |
Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 |
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 4 |
Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
Graphtec: Blade: 45° Force: 8-9 Tool: CB09+0 Speed: 30 cm/s |
MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold | Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |
EasyWeed Applies to: 100% cotton | Laundering: Wait 24 hours before 1st wash |