EasyWeed Extra All Color Pack
This complete pack comes with all 11 colors of Siser EasyWeed Extra.
Only 100% genuine Siser Extra heat transfer vinyl is used. All sheets are +/- 0.25in
- 1 x XT01 White Extra Sheet
- 1 x XT02 Black Extra Sheet
- 1 x XT03 Royal Blue Extra Sheet
- 1 x XT04 Navy Blue Extra Sheet
- 1 x XT05 Red Extra Sheet
- 1 x XT08 Orange Extra Sheet
- 1 x XT13 Silver Extra Sheet
- 1 x XT15 Purple Extra Sheet
- 1 x XT22 Gray Extra Sheet
- 1 x XT28 Sun Yellow Extra Sheet
- 1 x XT70 Vegas Gold Extra Sheet
- 1 x Siser Extra All Color Pack Inventory Control
EasyWeed® Extra Heat Transfer Vinyl
Our Best-Selling Heat Transfer Vinyl – Now for Nylon!
EasyWeed Extra shares almost all the great benefits of EasyWeed with the bonus of adhering to nylon! EasyWeed Extra is on a pressure-sensitive carrier so you can cut detailed logos and weed them effortlessly. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed Extra – with its semi-gloss finish, can be layered, extending your creativity and allowing you to say “yes” to more complicated designs. EasyWeed Extra can be cut with laser systems.
EasyWeed Extra is CPSIA Certified, so it’s perfect for decorating items intended for children.
Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
Cricut®:Blade: Standard Setting: Iron-on | Silhouette Cameo:Blade: Standard, 3 Setting: Heat Transfer Material (smooth) Speed: 8 Thickness: 6 | Scan N Cut:Blade: 2 Cut Speed: 1 Cut Pressure: 1 | Roland GS/GX-24:Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s | Graphtec:Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s |
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold | Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |
EasyWeed Applies to:100% cotton Poly/cotton blends 100% polyester Leather Nylon | Laundering:Wait 24 hours before 1st wash Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean |